Before starting a new shop project, be sure to review all applicable instructions.
-
Join 878 other subscribers
Top Posts & Pages
- Running fixed gear with vertical dropouts: the Trek 2300
- Bicycle small parts vendor, Loose Screws, liquidating
- Loose Screws Bicycle Parts. The past has a future again
- In the shop: Austro-Daimler Vent Noir
- Shimano Dura Ace 7400 crank, tubeless tires and the art of deception
- A conversation with Rob English about his 10.8-pound road bike, single-sided hubs and getting his weekends back
- Converted to 650B tires: the Motobecane Grand Touring
- Word on the street: Katy Shackelford
- Columbia goes Klunk for used bicycles
Search
- Follow 16incheswestofpeoria on WordPress.com
16incheswestofpeoria 
“Should I use a SRAM or a Mavic skewer to open this…?”
Obviously a defective product, given that I must supply my own access port–and that this isn’t port.
Love that shirt. Know where it came from?
Thanks. I wanted to make sure I got a picture of it on the sight. Unfortunately, that meant I’d have to model.
It looks like it was from a limited-edition run (of t-shirts? Come on). But here’s the information from Teespring; you’ll find contact information at the bottom of the page.
http://teespring.com/bike-mechanic
And thanks for dropping by my corner of the Interwebs.
On the site. Site. I know the difference.
Although it’s really faded, looks like a well used 75th anniversary Cat hat?
It is indeed. Brim has really been opening up the past month. Think I’ll glue in place and trim off the excess. And this time, not while I’m wearing it.
Do you work at Cat?
15 years downtown.
I’m in the Admin building, stop by when you can and we can talk bikes. I’m the first office on the left in 5C … look me up (Mike DeWalt)
That’s a deal. (Also: I’m in 2B, in the hall that leads to the AH walkway, across from the TV studio.)